Sales & Support
Request A Quote - Email
Payment & Shipping Terms:
|Name:||PCB Depaneler/PCB Depanelizer/PCB Depaneling Machine||Type:||Automatic Pcb Cutting Machine|
|Suitable PCB:||V-grooved Pcbs||PCB Thickness:||0.2-3.2MM|
|V Cut Thickness:||0.2-2.0MM|
PCB Separator, cut both small and large PCBs fast and economicaly. To optimize operation,the separation length can be programmed.
The PCB is placed with its pre-scored groove onto the linear blade,when the foot swith is pressed,the blade carrier with the circular blade moves across the PCB,separating it into individual units.
It can cut v-cut pcb board to units. Suitable for pcb, aluminum pcb, fiber panel.
Available PCB thickness: from 0.2mm to 3.2 mm
Available V-cut thickness: from 0.2mm to 2.0mm
|Model Blade Motion||Upper Circular Blade Moving Automatically|
|Cutting speed||300mm/sec or 500mm/sec|
|Upper circular blade||diameter 125mm,cutting point angle 26-28'|
|Lower blade||430mm long,max cutting length 400mm,cutter point angle 26-28'|
|Drive mode||Micro stepping motor + precise linear guaidway|
Three years for the pc board
One year for unit machine
1. The nether linear blade is used to fix the PCB V-cut, the upper circular blade moves to separate the PCB. By pressing the foot-pedal to control upper circular blade.
2. Adopt step motor, can separate all kinds of V-cut PCB 3.Max separate length 1200mm (400mm, 600mm, 900mm, 1200mm is optional)
4. The stroke of the upper circular blade can preset. (Setting rang: Between any two groups of 0,100, 200,300,400mm)
5. Blade moving speed can switch between 300mm/s and 500mm/s.
6. The gap between two blades is easy to adjust
7. Operation is very safe, the circular blade is covered by material, avoid the blade hurting hand. Also can install a sensor, when hand or foreign matter enters into the working area, it will stop immediately.
8. Blade material is SKH7 from Sweden, long lifetime. During cutting, it can effectively decrease cutting stress to avoid welding spot cracking.
Pictures of PCB depaneler/PCB depanelizer/PCB depaneling machine
Blade Moving To Separate/Cut PCBS
pcb depanelizer is packed by wooden case
Welcome to contact for more about our PCB depaneler/PCB depanelizer/PCB depaneling machine
1.What is the working principle for the pcb depaneling machine?
There are two blades for machine: Lower linear blade and upper circular blade. Put V cut of the pcb on lower linear blade, upper circular blade moves to separate pcbs.
2. What types of pcb can it separate?
Machine can only separate PCBs with v cut.
3. How long pcbs can it cut?
According to your pcb length, we have different machines for you. Such as YS-805A for pcbs less than 400MM length. YS-805B for pcbs less than 600mm length. JX-F300 for unlimited length of pcbs.
4.What is the voltage?
Machine is for 110V or 220V voltage. According to your country, we will convert voltage for you.
5. How to pack it?
Machine is packed by exported wooden case.
6. What is the warranty?
Warranty is 1 year.
Contact Person: Ms. Sally Way