PCB Depaneling Machine , PCB Depaneling , Motorized PCB Depanel Machines

Intro:

PCB depaneling machine can separate PC and LED boards cleanly, without stressing the boards, circuits, or components. PCB v cut and straight knfe pcb d is a motorized depaneling machine for V-scored PCB. It is very easy to operate. Operator just need to put PCB V-cut on the lower linear blade, then press foot switch, uppder blade will moves from one side to another side to separate the PCB.

Suitable:

PCB Depaneling Machine , PCB Depaneling , Motorized PCB Depanel Machines

It can cut v-cut pcb board to units. Suitable for pcb, aluminum pcb, fiber panel.

Available PCB thickness: from 0.2mm to 3.2 mm

Available V-cut thickness: from 0.2mm to 2.0mm

Maximum board length: Any length pcb is available, we have different models machine according to your pcb length.

Parameter

Features:

1. The nether linear blade is used to fix the PCB V-cut, the upper circular blade moves to separate the PCB. By pressing the foot-pedal to control upper circular blade.

2. Adopt step motor, can separate all kinds of V-cut PCB 3.Max separate length 1200mm (400mm, 600mm, 900mm, 1200mm is optional)

4. The stroke of the upper circular blade can preset. (Setting rang: Between any two groups of 0,100, 200,300,400mm)

5. Blade moving speed can switch between 300mm/s and 500mm/s.

6. The gap between two blades is easy to adjust

7. Operation is very safe, the circular blade is covered by material, avoid the blade hurting hand. Also can install a sensor, when hand or foreign matter enters into the working area, it will stop immediately.

8. Blade material is SKH7 from Sweden, long lifetime. During cutting, it can effectively decrease cutting stress to avoid welding spot cracking.

Working principle

Fix the v-cut of the pcb on the lower blade, and the upper circular blade moves to cut the pcb. Clear cut, no damage to PCB.

Pictures of v cut V PCB Separator, PCB Depanel

Blade Moving To Separate/Cut PCBS

pcb depanelizer is packed by wooden case

Welcome to contact for more about our v cut pcb board separator/pcb board cutting machine

Questions&Answer

1.What is the working principle for the pcb depaneling machine?

There are two blades for machine: Lower linear blade and upper circular blade. Put V cut of the pcb on lower linear blade, upper circular blade moves to separate pcbs.

2. What types of pcb can it separate?

Machine can only separate PCBs with v cut.

3. How long pcbs can it cut?

According to your pcb length, we have different machines for you. Such as YS-805A for pcbs less than 400MM length. YS-805B for pcbs less than 600mm length. JX-F300 for unlimited length of pcbs.

4.What is the voltage?

Machine is for 110V or 220V voltage. According to your country, we will convert voltage for you.

5. How to pack it?

Machine is packed by exported wooden case.

6. What is the warranty?

Warranty is 1 year.